18th century 12th scale Louis Wall paneling and Wainscoting unfinished
This wonderful paneling is a copy of an original full size french panelling. It comes in two height and three widths. 
There are various ways to use it. The panels can be placed tightly next to each other to create one continuous line of panelling without any breaks. Or it could be interspersed with columns or seperated to create a placed effect. 
The wainscoting is the same width as the decorative panelling and only comes in one height. 
To achieve the correct height of panelling from floor to ceiling the panels can be  placed above the wainscoting with a gap between them. You can of course fill this gap with a panel or maybe some pretty moulding. 
 
Sizes:
Short decorative panelling (all approx. 5mm thick):
A (narrow) 30mm wide x 140mm high
B (medium wide) 60mm wide x 140mm high
C (wide) 90mm wide x 140mm high
Tall decorative panelling (all approx. 5mm thick):
A (narrow) 30mm wide x 210mm high
B (medium) 60mm wide x 210mm high
C (wide)  90mm wide x 210mm high
 
Wainscotting: 
Small 30mm wide x 70mm high
Medium 60mm wide x 70mm high
Large 90mm wide x 70mm high
 
 
 
Made from resin and supplied unfinished
Always use a primer prior to painting the resin (unless aging) - the rubber moulds are silicone and have oils that occassionally transfer to the resin. On occassions this can affect how paint "sticks" to the resin.